৫ই ডিসেম্বর, ২০২২ খ্রিস্টাব্দ, ২০শে অগ্রহায়ণ, ১৪২৯ বঙ্গাব্দ

Course Name: Professional Course on Building Automation System (BMS)

5/5

Course Description

Course Name: Professional Course on Building Automation System (BMS)

Facilities

• Project based training • Case study • Lecture sheets, Video Lectures • Group discussion • Lecture/practical review • Project site visit (if available) • Lab assistant for any help • Life-time access for this course • Certificate

Regular course fee: 12,000 taka

Discount course fee:8,000 taka

শুধু পিএলসি শিখলেই চাকরি পাবেননা !!
বাংলাদেশের বেশির ভাগ শিক্ষার্থীরা মনে করে যে শিল্প ক্ষেত্রে চাকরি নিশ্চিত করার জন্য PLC-র জ্ঞানই যথেষ্ট। যে সিস্টেমটি 24/7 অবিরাম শিল্প চালাচ্ছে তা শুধুমাত্র পিএলসি ব্যবহার করে নিয়ন্ত্রণ করা যায় না। সিস্টেমের সেটআপ একটি স্বয়ংক্রিয় সিস্টেম। অটোমেশনটি PLC, VFD, HMI, MCC SCADA,DCS,DDC ইত্যাদির সমন্বয়ে গঠিত হয়।
অতএব, PLC এবং PLC প্রোগ্রামিং এর উপর শুধু জ্ঞান একজন System Technical Engineer/Project Engineer/Site Engineer এর প্রয়োজনীয়তা পূরণ করে না। এই বিষয়ে নতুন স্নাতকদের প্রায়ই এই সম্পর্কে অপর্যাপ্ত তথ্য থাকে। PLC-র জ্ঞান ছাড়াও, আপনার একটি Automation System এবং Automation System Design করার দক্ষতা থাকতে হবে। আপনি যদি PLC দক্ষতার পাশাপাশি Automation System এর বিভিন্ন ফিল্ডে দক্ষ হন, তবেই আপনি বাংলাদেশের পাশাপাশি বিদেশেও উচ্চ শিক্ষার সুযোগ সহ চাকরি পেতে পারেন।
বেশীরভাগ ট্রেইনিং প্রতিষ্ঠানগুলো শুধুমাত্র PLC এর মৌলিক অংশ শেখায়। এই প্রতিষ্ঠানগুলো শিক্ষার্থীদেরকে সম্পূর্ণভাবে Automation System এর ওপর প্রশিক্ষণ দেওয়ার প্রয়োজনীয়তা বোধ করে না। কারণ জাতীয় ও আন্তর্জাতিক প্রকল্পে তাদের অভিজ্ঞতা এবং দক্ষতার ঘাটতি রয়েছে।
এখন আসেন, এই সমস্যা সমাধানে 'আল্টেরিওর ইঞ্জিনিয়ারিং(Ulterior Engineering)' কি সেবা দিচ্ছে।
আল্টেরিয়র ইঞ্জিনিয়ারিং(Ulterior Engineering) আপনাকে Industrial Automation System এর একদম বেসিক থেকে এডভান্সড প্রশিক্ষণ প্রদান করবে যেখানে অ্যানালগ, ডিজিটাল, সিস্টেম Automation System এর একটি সমন্বয় থাকে এবং আমরা নিশ্চিত করে যে এই কোর্সটি শেষ করার পরে আপনি Automation System ফিল্ডে বাংলাদেশের পাশাপাশি বিদেশেও চাকরি পেতে সক্ষম হবেন।
আল্টেরিয়র ইঞ্জিনিয়ারিংয়ের প্রশিক্ষকদের 100 টিরও বেশি জাতীয় এবং আন্তর্জাতিক প্রকল্পে কাজের অভিজ্ঞতা রয়েছে। আমাদের প্রকৌশলীরা হলেন DELTA, SEIMENS Certified Automation Engineer , যারা আন্তর্জাতিকভাবে প্রশিক্ষিত এবং সৌদি আরব, সুদান, আলজেরিয়া এবং বাংলাদেশের মতো সোলার, অটোমেশন এবং পাওয়ার সিস্টেম সেক্টরে প্রকল্পগুলি সম্পন্ন করেছেন।
Most students in Bangladesh think that knowledge on PLC is sufficient to secure a job in the industrial field. The system that is running the industry Non-stop 24/7 cannot be controlled by only using PLC. The setup of the system is an automated system . The automation is formed with a combination of PLC, VFD, HMI, MCC SCADA etc.
Therefore, sole knowledge on PLC and PLC programming does not fulfill the requirements of a system technical engineer. Fresh graduates often have inadequate information about the requirements. Aside from the knowledge, you also need to have the skills to design an automation system. If you are equipped with both, only then and then you can get a job in Bangladesh as well as overseas.
Maximum training institutes only teach the basic part of PLC. These institutes do not feel the necessity to train up the students completely on automation. The reason is their lack of involvement in national and international projects.
Ulterior Engineering brings you basic to advanced training in industrial automation which covers from analog, digital, a collection of system automation and ensures that after completion of this course you will be able to get a job in Bangladesh as well as abroad.

• The architecture & different levels of the BMS system
• The different common protocols used for BMS system and the most used protocol.
• Understanding the types of I/O points and their types
• Understanding the different methods to connect devices in the BMS system
• Understanding Sequence of Operation (SOP)
• Understanding the Graphics of BMS
• The different types of documents used with the BMS system submittal
• Understand basic controls in the air distribution system and chiller plant using Building Management System (BMS)
• BMS , Building management system , building automation systems , design and calculations
• They will be professional in design Building Management System (BMS) OR Building Automation System and have great opportunity to work in a large number of consulting firms, international contracting
  • PC Configuration: Intel or AMD x86-64 processor (3.00 GHz), Minimum of 4 GB RAM, An SSD is recommended,
  • It is advisable to have a good familiarity with PC operations and a working knowledge of some basic application software (Excel).
  • Basic Electrical-Electronic knowledge are highly beneficial.
  • Automation Studio (MCC, PLC, VFD)
  • VFD software.
  • Levi studio
  • Panel Draw
  • Visio
  • Excel
  • EKTS

Instructors of Ulterior Engineering have experience in more than 100 national and international projects. Our engineers are Delta, Siemens certified automation engineers, who have been internationally trained and have completed projects in the solar, automation and power system sectors such as Saudi Arabia, Sudan, Algeria and Bangladesh.

.
📌Instructor Details
✒️Sheikh Rafat Bin Ali,
Chief Executive Officer,Ulterior Engineering
Project Engineer, Delta Control, Saudi Arabia
Project Manager, Samasun Int, Saudi Arabia
Project Manager, Tasisat Renewable Energy and Automation, Saudi Arabia
CTO, Solarais International, UAE.
Delta Certified Automation Engineer, Saudi Arabia
Solar Certified PV Engineer, Saudi Arabia
✒️Ibrahim Jonaid Jarir,
Chief Technical Officer
Ulterior Engineering
Electrical and Automation Engineer, KDS Steel
✒️Fahim Shariar Khan,
Training Division Manager
Ulterior Engineer
CEO, Power Tech Consultancy Company

Engineering students -University & polytechnic (1st to 8th semester), Job Holder - Junior and Mid-level Engineers, Senior Officers working in different industries and companies.

Course Outline

 Architecture Software and product  Architecture System Subnet Field Level  Architecture Gateways  Addressing  Powering  Inputs  Outputs  IO Reference  Event Management  GCL  Illustrator  Objects and IO  PID Control The Delta Network  Delta Network Medium  BACnet Ethernet  BACnet over IP  BACnet MS/TP  LINKnet DDC(Direct Digital Control):  Controller Types  enteliBUS (eBCON)  enteliTOUCH (eTCH)  Delta System Controller (DSC)  Delta System Manager (DSM)  Delta Application Controller (DAC)  Delta VAV Controller (DVC)  Delta Field Module (DFM)  Delta Network Sensor (DNS) Building Controllers  Delta System Controller  enteliBUS  Building Controller – DSM  DAC – Application Controllers  Delta Application and VAV Controllers  DAC/DVC  DNS/DNT – Delta Network Sensors/Thermostats  Delta Network Sensor/Thermostat  DFM – Delta Field Modules Network Architecture  DNA – Derived Network Addressing  Device Addressing, Dipswitch (DNA) Addressing  Problem and Solution: Addressing  MS/TP Networking  BACnet MS/TP vs. LINKnet  Network Numbers  Delta Network and I/O Guidelines Delta Network Types & Cabling Guidelines • RS-485 Cable Type/BACnet MSTP • BACnet Ethernet, BACnet UDP/IP, BACnet PTP Introduction to GCL+ (edit) • Basic GCL Rules • If statement example • Classic new user GCL Mistake • If statements: Here’s a complete program • If statements: Use else to complete the program • Parenthesis • Line Continuation • Line Continuation • PG Execution and Error Symbols • If Once statements • Status Operators • Basic Data Exchange • Basic Data Exchange – Do Every 30s Event Management  Active Alarm Folder  Notifications, Classes  Routing – Paging, Printing, Emailing  Logging, Filters  Event (EV), Event Class (EVC), Event Filter (EVF)  Event Router (EVR), Event Log (EVL), Event Settings (EVS)  Active Alarm List , EV (Event) object  Analog Alarms/Events  Binary and Bit Events  Alarm – Change of State, Alarm – Out of Range  Alarm – Floating Limit, Alarm – Time Delay, Alarm – Deadband  Alarm – Command Failure, Event Settings (EVS)  Active Alarm List

Other courses

  • 🎓TIA Portal:

       📌Plc programming

       📌Ladder language with digital I/O

       📌Ladder language with analog I/O

     

    🎓SCADA:

    • Industrial Application – Conveyor Control from SCADA – Designing Screen
    • Industrial Application – Making Tags
    • Time based update/deletion of data
    • Creating Reports in the SCADA Screen
    • Simple Label
    • Numeric Label
    • Multi-state Indicator
    • LED Display
    • Moving Analogue Indicator
    • Cylindrical Tank, Level Indicators & Linear Scale
    • Meter & Thermometer
    • Numeric Input
    • PLC Box Sorting (1)- Understanding the Environment & SCADA Screen
    • PLC Box Sorting (2)- Creating and Linking Tags
    • PLC Batching (1)- Understanding the Environment and Ladder Logic
    • PLC Batching (2)- Creating and Linking tags
    • PLC Batching (3)- Animating the Level Indicators
    • PLC Batching (4)- Monitoring Plant Status
    • Controlling and Monitoring an Analogue Process- VFD Control




  • 🔰Substation types

    • 🔖Knowledge about different types of substations
    • 🔖 What are the basic documents you need to know for a substation design?
    • 🔖Plan, SLD, Sectional Draw, Layout E.T.C

    🔰Switchgear types

    • 🔖AIS
    • 🔖 GIS

    🔰Types of transformers

    • 🔖Power Transformer
    • 🔖Distribution Transformer
    • 🔖Other transformer
    • 🔖Selection of transformer

    🔰Transformer parts and accessories

    • 🔖Bushing
    • 🔖Main / conservator tank
    • 🔖Radiator, OTI, WTI E.T.C
    • 🔖OLTC

    🔰Switchgear system with selection and calculation

    • 🔖 CT
    • 🔖PT
    • 🔖 ISOLATOR
    • 🔖 ACB/VCB/SF6

    🔰Substation controlling

    • 🔖 CT
    • 🔖PT
    • 🔖 ISOLATOR
    • 🔖 ACB/VCB/SF6
    • 🔖Multifunctional relay
    • 🔖Transformer Controlling
    • 🔖MK Box

    🔰Transformer self-protection

    • 🔖Buchholz Relay
    • 🔖 PRD
    • 🔖OSR

    🔰Other’s protection

    • 🔖 Differential Relay
    • 🔖 Directional/NON Directional, O/C , E/F
    • 🔖TCS Relay
    • 🔖Under/Over voltage relay
    • 🔖 Trip relay

    🔰Relay programming

    • 🔖 Knowledge about relay programming
    • 🔖Areva
    • 🔖 Micom /Schneider

    🔰Earthing

    • 🔖Substation Earthing
    • 🔖Switchgear and relay testing details
    • 🔖Knowledge about substation testing kit

    Transformer testing

    • 🔖Meggar Insulation test
    • 🔖Oil test
    • 🔖 Tan delta test
    • 🔖 Magnetic balance test
    • 🔖 Vector Group Test

    🔰PFI

    • 🔖Calculation
    • 🔖 Design
    • 🔖 Panel Making

    🔰Panel making

    • 🔖 PCC Panel
    • 🔖PFI panel
    • 🔖MCC panel

     

    🔰Substation documentation

    • 🔖Records
    • 🔖 Checking
    • 🔖 Spares
    • 🔖Billing

    🔰SCADA

    • 🔖 Metering
    • 🔖 Controlling
    • 🔖 Designing

    🔰Design and Calculation with ETAP Software

    • 🔖 Load flow analysis
    • 🔖Short circuit analysis
    • 🔖Voltage drop analysis
    • 🔖Arc flash studies
    • 🔖Types of buses
    • 🔖SLD
    • 🔖 Earthing design

     

     

  •    📌Introduction of Industrial Safety
  •    📌BNBC, NFPA, ACCORD, Alliance Rules about Safety.
  •    📌Hazard Controls
  •    📌What is Fire?
  •    📌Classification of Fire & Fire Extinguishing.
  •    📌How to use a Fire Extinguisher?
  •    📌Electrical Safety Management System
  •    📌Types of Injuries Based on The Amount of Current Flowing Through the Body
  •    📌Lock Out, Tag Out
  •    📌Safety and Health Signalization.
  • 🔰Overview of solar PV system (PART-1)

       🔸Introduction of solar PV system

       🔸Solar cell, solar panel, solar string, solar array

       🔸Different Solar module connection configuration

       🔸 Types of solar panel, Solar PV system, Inverter.

       🔸Overview of main components of the system

       🔸Types of structure

       🔸 O/P of solar PV system

       🔸What affects electricity output

       🔸 Getting the most electricity from a panel

       🔸 Thermal generation (CSP) & Photovoltaic (CPV)

    🔰 Postmortem of Solar Cells (PART-2)

       🔸 Solar radiation, GHI, GII, GEI

       🔸 Hot spot effect

       🔸 Half-cell, multi-busber cell

       🔸100% efficient solar panel & Cell

       🔸 Solar cell datasheet & Smaller cell vs bigger cells

       🔸 Fill factor

       🔸 Solar cell multi-busber & cutting and reconnecting

       🔸 Make the solar panel by cell

       🔸 Compare between Panel efficiency & cell efficiency

    🔰 Postmortem Solar Panel(PART-3)

       🔸  Different Solar panel datasheet overview

       🔸  Mono , Mono Perc & Mono Bifacial silicon solar panels

       🔸  STC ,NOCT,PTC &CEC panel power output,Voltage,Amp per m2

       🔸  High temperature & low temperature impact on solar cell, panel and system

       🔸  Calculate minimum voltage of solar panel and system

       🔸  Calculate maximum voltage of solar panel and system

       🔸  Calculate NEC maximum voltage of solar panel and system

       🔸  Temp rating of solar panel

       🔸  Temp coefficient of different types of solar panel

       🔸  Mono vs Mono ,Poly vs Poly & Mono vs Poly high temp performance

       🔸  The min and max number of panels in the string and array

       🔸  Max current and max series fuse rating maximum system sizing

       🔸  Factors that change performance of PV.

    🔰 Solar Pv Design by excel sheet(PART-4)

       🔸 Calculate Solar panel efficiency power and size

       🔸 Calculate Solar panels min. Voltage , max. Voltage & nec table calculation

       🔸 Calculate Solar panels series, parallel & mixed connections

       🔸 Calculate Solar array max. Voltage calculations

       🔸 Calculate From String & array to combiner box

       🔸 Calculate Battery introduction

       🔸 Calculate Battery temp compensation introduction

       🔸 Calculate Battery temp and charger controller numbers speaking part 1

       🔸 Calculate Batteries connections – series and parallel

       🔸 Calculate Battery bank sizing

       🔸 Calculate Inverter sizing

    🔰 Project Planning (PART-5)

       🔸Step 1: engineering site visit

       🔸 Step 2: permits and documents

       🔸 Step 3: ordering equipment

       🔸Step 4: civil work

       🔸Step 5: structure

       🔸Step 6: panel installation

       🔸Step 7: electrical work

       🔸Step 8: testing and commissioning

       🔸Step 9: project report submission

    🔰 Overview Your Location.(PART-6)

       🔸 Latitude, longitude & Coordinates’ position indicators

       🔸 Time zone & Time difference between two locations

       🔸  Latitude and seasonal changes

       🔸  Understand of sun path chart

       🔸  Magnetic & true azimuth

       🔸  Understand of Solar panel optimum orientation

       🔸  Solar irradiance & power production in Different hemisphere

       🔸  Adjustable tilt angle setting & Fixed tilt setting- solar irradiance & power production

    🔰 The Shadow – Three Different Sources (PART-9)

       🔸  Shadow length in summer solistice & winter solistice

       🔸  Shadow length on equinoxes

       🔸  Solar panel shadow at any tilt ,location & time

    🔰 Solar Pv Design By Sketchup Software(3d Animation) (PART-10)

       🔸  Number of project design by sketchup software

       🔸  Shadow analysis

       🔸  Pvwatt,pvgis report

       🔸  3D animation making with video

       🔸  Solar project by skelion

    🔰 Protective Device & Cable Sizing(PART-11)

       🔸  Solar cable and sizing

       🔸  Protection system and sizing

    🔰1-10 Mw Solar Pv Project Design By Pvsyst Software(PART-12)

       🔸  A complete walkthrough of the pvsyst software

       🔸  Define site characteristics including location and weather data

       🔸  The science, mathematics & art behind solar pv system design

       🔸  The complete understating of a client’s requirements to prepare a pvsyst design

       🔸  Performing a virtual and in-person site assessment

       🔸  Learn to calculate all input values such as azimuth, tilt, losses, etc.

       🔸  Aanalyze the output

       🔸  Gain an overview of the system losses, and how they impact the simulation of the pv system.

       🔸 Detailed knowledge of losses, 3d modeling and near shading analysis

       🔸  Analysing a pvsyst report and creating a professional sales proposal

       🔸  Being able to independently perform grid-connected pvsyst simulations of up to 10 mw

       🔸  Perform p50 – p90 estimations for a pv system.

       🔸  Perform economic and greenhouse gas abatement analysis on a pv system.

    🔰 Pvsyst With Sketchup(PART-13)

       🔸  Mega watt project on grid system pvsyst design step by step

       🔸  One complete sketchup design for solar system step by step

       🔸 Number of example of solar project design by pvsyst with Sketchup

🎓Section 1: MATLAB Introduction

🎓Section 2: SIMULINK Introduction

🎓Section 3: MATLAB BASIC CODING

  1. Coding basic
  2. Entering Command & Matrix & Array
  3. Array & Data
  4. Characters & Strings
  5. Data type & Conversion

 

🎓Section 4: MATHEMATICS

  1. Elementary Math, variables and constants, operators.
  2. Matrix and Linear Algebra review
  3. Random Number Generation
  4. Interpolation
  5. Numerical Integration & Differential Equations
  6. FOURIER ANALYSIS
  7. PLOTTING

 

🎓Section 5: SIMULATION

  1. Familiarization with Power System Block
  2. DC /AC CKT design (KVL, KCL, RMS, Regulation, Harmonic etc.)
  3. Design a Micro grid from basic

🎓Section 6: Power System Engineering

🎓Section 7:

Machine learning basic with MATLAB

IoT basic & IDE device interfacing with MATLAB

🔰Part 1:

  1. About AutoCAD Electrical Software
  2. Software Installation

🔰Part 2

  1. Welcome Screen
  2. AutoCAD user interface
  3. Navigation Bar
  4. WCS\UCS
  5. View Cube
  6. Co-ordinate System
  7. Units Setup
  8. Limit
  9. Grid
  10. Grid Display
  11. Snap
  12. Dynamic Input
  13. Ortho Mode
  14. Save File
  15. Application Menu Button
  16. Unit

🔰Part 3

  1. Polyline
  2. Circle
  3. Arc
  1. Copy
  2. Erase
  3. Polar Tracing
  4. Object Snap

🔰Part 4

  1. Select Object
  2. Rotate
  3. Scale
  4. Offset
  5. Mirror
  6. Trim
  7. Extend
  8. Chamfer
  9. Fillet
  10. Rectangular Array
  11. Polar Array
  12. Path Array

🔰Part 5

  1. Dimension
  2. Text
  3. Line weight
  4. Line Type
  5. Match Properties
  6. Table
  7. Layer
  8. Block

🔰Part 6

  1. Donut
  2. Region
  3. Wipeout
  4. Helix
  5. Spline
  6. Xline
  7. Ray
  8. Point
  9. Multiple Point
  10. Divide
  11. Measure
  12. Break
  13. Break at Point
  14. Join
  15. Stretch
  16. Boundary

🔰Part 7(BNBC,NEPA,IEC,NEC Rule regulations)

📌Project-1

1.how to draw a floor plan

2.how to daw side elevation of a building

📌Project-2

1.Motor controlling theory

2.how to draw motor controlling diagram in Autocad electrical

3.Load calculation of motor controlling circuit

📌Project-3

1.How to draw electrical layout diagram

2.total load calculation of a building

📌Project-4

1.single line diagram of a substation with load calculation

2.single line diagram of building with load calculation

📌Project-5

1.How to draw LPS system in Autocad electrical

2.total load calculation of a LPS system

📌Project-6

1.How to draw a sub-station room in SketchUp software

📌Project-7(BNBC,NEPA,IEC,NEC Rule regulations)

1.Prince Mohammad Bin Abdul Aziz International Airport, Automation

2.Hearth Center in King Fahad Hospital, Building Management System

3.Taibah University Madinah,Female phase 2 male phase 1 2, male B16 A, Lab and research center B19,

4.Science College male B 11, PLC Automation.

5.Wadi Ridan Industry, PLC, VFD, Automation

6.Bosphour 1, 5 Star Hotel, Automation System

7.Bosphour 2, 5 Star Hotel. Automation System

8.Asafia Hotel 5 Star Hotel,Automation System

9.Holiday villa 5 Star Hotel,Automation System

10.Nokba 5 Star Hotel,Automation System

11.Alamana Palace 5 Star Hotel,Automation System

12.Islamic University gymnasium building,Automation System

13.Royal Commision of Saudi Arabia, 500kva generator

14.Qala Haziziya School,Automation System

15.Al Faihaa,Automation System

16.Al Rabaa Tower,Automation System

17.Dean Maramara,Automation System

18.Chamber of Commerce ,Automation System

19.Khurasaniya,Automation System

20.Manar Al Madina,Automation System

21.Alrajhi Bank,Automation System

22.Social College in Madina,Automation System

23.Al Rafeaa,Automation System

24.Medecine College Jedda,Automation System

25.King Abdul Aziz University,Automation System

26.RUH School,Automation System

27.250 KW On grid system, Madina Qala Haziziya School

28.170 KW irrigation system, Sudan

29.720 KW Solar System, Sudan

30.2.1 MW Saudi Arabia

31.50 KW Madia

32.Street light in Madina

33.6HI Mill

34.Colour Coating Line

35.Trimming and Picking line

36.132/33kv(GIS+AIS) substation

37.CTL

38.Unilever Scada project and many more.

39. Lab Development & Modification, Daffodil Institute of IT

40. Mustafa Hakim Group, Cement Mill – Existing System Modification with Automation.

Course Name: Professional Course on Building Automation System (BMS)

5/5

Course Description

Course Name: Professional Course on Building Automation System (BMS)

Facilities

• Project based training • Case study • Lecture sheets, Video Lectures • Group discussion • Lecture/practical review • Project site visit (if available) • Lab assistant for any help • Life-time access for this course • Certificate

Regular course fee: 12,000 taka

Discount course fee:8,000 taka

শুধু পিএলসি শিখলেই চাকরি পাবেননা !!
বাংলাদেশের বেশির ভাগ শিক্ষার্থীরা মনে করে যে শিল্প ক্ষেত্রে চাকরি নিশ্চিত করার জন্য PLC-র জ্ঞানই যথেষ্ট। যে সিস্টেমটি 24/7 অবিরাম শিল্প চালাচ্ছে তা শুধুমাত্র পিএলসি ব্যবহার করে নিয়ন্ত্রণ করা যায় না। সিস্টেমের সেটআপ একটি স্বয়ংক্রিয় সিস্টেম। অটোমেশনটি PLC, VFD, HMI, MCC SCADA,DCS,DDC ইত্যাদির সমন্বয়ে গঠিত হয়।
অতএব, PLC এবং PLC প্রোগ্রামিং এর উপর শুধু জ্ঞান একজন System Technical Engineer/Project Engineer/Site Engineer এর প্রয়োজনীয়তা পূরণ করে না। এই বিষয়ে নতুন স্নাতকদের প্রায়ই এই সম্পর্কে অপর্যাপ্ত তথ্য থাকে। PLC-র জ্ঞান ছাড়াও, আপনার একটি Automation System এবং Automation System Design করার দক্ষতা থাকতে হবে। আপনি যদি PLC দক্ষতার পাশাপাশি Automation System এর বিভিন্ন ফিল্ডে দক্ষ হন, তবেই আপনি বাংলাদেশের পাশাপাশি বিদেশেও উচ্চ শিক্ষার সুযোগ সহ চাকরি পেতে পারেন।
বেশীরভাগ ট্রেইনিং প্রতিষ্ঠানগুলো শুধুমাত্র PLC এর মৌলিক অংশ শেখায়। এই প্রতিষ্ঠানগুলো শিক্ষার্থীদেরকে সম্পূর্ণভাবে Automation System এর ওপর প্রশিক্ষণ দেওয়ার প্রয়োজনীয়তা বোধ করে না। কারণ জাতীয় ও আন্তর্জাতিক প্রকল্পে তাদের অভিজ্ঞতা এবং দক্ষতার ঘাটতি রয়েছে।
এখন আসেন, এই সমস্যা সমাধানে 'আল্টেরিওর ইঞ্জিনিয়ারিং(Ulterior Engineering)' কি সেবা দিচ্ছে।
আল্টেরিয়র ইঞ্জিনিয়ারিং(Ulterior Engineering) আপনাকে Industrial Automation System এর একদম বেসিক থেকে এডভান্সড প্রশিক্ষণ প্রদান করবে যেখানে অ্যানালগ, ডিজিটাল, সিস্টেম Automation System এর একটি সমন্বয় থাকে এবং আমরা নিশ্চিত করে যে এই কোর্সটি শেষ করার পরে আপনি Automation System ফিল্ডে বাংলাদেশের পাশাপাশি বিদেশেও চাকরি পেতে সক্ষম হবেন।
আল্টেরিয়র ইঞ্জিনিয়ারিংয়ের প্রশিক্ষকদের 100 টিরও বেশি জাতীয় এবং আন্তর্জাতিক প্রকল্পে কাজের অভিজ্ঞতা রয়েছে। আমাদের প্রকৌশলীরা হলেন DELTA, SEIMENS Certified Automation Engineer , যারা আন্তর্জাতিকভাবে প্রশিক্ষিত এবং সৌদি আরব, সুদান, আলজেরিয়া এবং বাংলাদেশের মতো সোলার, অটোমেশন এবং পাওয়ার সিস্টেম সেক্টরে প্রকল্পগুলি সম্পন্ন করেছেন।
Most students in Bangladesh think that knowledge on PLC is sufficient to secure a job in the industrial field. The system that is running the industry Non-stop 24/7 cannot be controlled by only using PLC. The setup of the system is an automated system . The automation is formed with a combination of PLC, VFD, HMI, MCC SCADA etc.
Therefore, sole knowledge on PLC and PLC programming does not fulfill the requirements of a system technical engineer. Fresh graduates often have inadequate information about the requirements. Aside from the knowledge, you also need to have the skills to design an automation system. If you are equipped with both, only then and then you can get a job in Bangladesh as well as overseas.
Maximum training institutes only teach the basic part of PLC. These institutes do not feel the necessity to train up the students completely on automation. The reason is their lack of involvement in national and international projects.
Ulterior Engineering brings you basic to advanced training in industrial automation which covers from analog, digital, a collection of system automation and ensures that after completion of this course you will be able to get a job in Bangladesh as well as abroad.

• The architecture & different levels of the BMS system • The different common protocols used for BMS system and the most used protocol. • Understanding the types of I/O points and their types • Understanding the different methods to connect devices in the BMS system • Understanding Sequence of Operation (SOP) • Understanding the Graphics of BMS • The different types of documents used with the BMS system submittal • Understand basic controls in the air distribution system and chiller plant using Building Management System (BMS) • BMS , Building management system , building automation systems , design and calculations • They will be professional in design Building Management System (BMS) OR Building Automation System and have great opportunity to work in a large number of consulting firms, international contracting
  • PC Configuration: Intel or AMD x86-64 processor (3.00 GHz), Minimum of 4 GB RAM, An SSD is recommended,
  • It is advisable to have a good familiarity with PC operations and a working knowledge of some basic application software (Excel).
  • Basic Electrical-Electronic knowledge are highly beneficial.
  • Automation Studio (MCC, PLC, VFD)
  • VFD software.
  • Levi studio
  • Panel Draw
  • Visio
  • Excel
  • EKTS

Instructors of Ulterior Engineering have experience in more than 100 national and international projects. Our engineers are Delta, Siemens certified automation engineers, who have been internationally trained and have completed projects in the solar, automation and power system sectors such as Saudi Arabia, Sudan, Algeria and Bangladesh.

.
📌Instructor Details
✒️Sheikh Rafat Bin Ali,
Chief Executive Officer,Ulterior Engineering
Project Engineer, Delta Control, Saudi Arabia
Project Manager, Samasun Int, Saudi Arabia
Project Manager, Tasisat Renewable Energy and Automation, Saudi Arabia
CTO, Solarais International, UAE.
Delta Certified Automation Engineer, Saudi Arabia
Solar Certified PV Engineer, Saudi Arabia
✒️Ibrahim Jonaid Jarir,
Chief Technical Officer
Ulterior Engineering
Electrical and Automation Engineer, KDS Steel
✒️Fahim Shariar Khan,
Training Division Manager
Ulterior Engineer
CEO, Power Tech Consultancy Company

Engineering students -University & polytechnic (1st to 8th semester), Job Holder - Junior and Mid-level Engineers, Senior Officers working in different industries and companies.

Course Outline

 Architecture Software and product  Architecture System Subnet Field Level  Architecture Gateways  Addressing  Powering  Inputs  Outputs  IO Reference  Event Management  GCL  Illustrator  Objects and IO  PID Control The Delta Network  Delta Network Medium  BACnet Ethernet  BACnet over IP  BACnet MS/TP  LINKnet DDC(Direct Digital Control):  Controller Types  enteliBUS (eBCON)  enteliTOUCH (eTCH)  Delta System Controller (DSC)  Delta System Manager (DSM)  Delta Application Controller (DAC)  Delta VAV Controller (DVC)  Delta Field Module (DFM)  Delta Network Sensor (DNS) Building Controllers  Delta System Controller  enteliBUS  Building Controller – DSM  DAC – Application Controllers  Delta Application and VAV Controllers  DAC/DVC  DNS/DNT – Delta Network Sensors/Thermostats  Delta Network Sensor/Thermostat  DFM – Delta Field Modules Network Architecture  DNA – Derived Network Addressing  Device Addressing, Dipswitch (DNA) Addressing  Problem and Solution: Addressing  MS/TP Networking  BACnet MS/TP vs. LINKnet  Network Numbers  Delta Network and I/O Guidelines Delta Network Types & Cabling Guidelines • RS-485 Cable Type/BACnet MSTP • BACnet Ethernet, BACnet UDP/IP, BACnet PTP Introduction to GCL+ (edit) • Basic GCL Rules • If statement example • Classic new user GCL Mistake • If statements: Here’s a complete program • If statements: Use else to complete the program • Parenthesis • Line Continuation • Line Continuation • PG Execution and Error Symbols • If Once statements • Status Operators • Basic Data Exchange • Basic Data Exchange – Do Every 30s Event Management  Active Alarm Folder  Notifications, Classes  Routing – Paging, Printing, Emailing  Logging, Filters  Event (EV), Event Class (EVC), Event Filter (EVF)  Event Router (EVR), Event Log (EVL), Event Settings (EVS)  Active Alarm List , EV (Event) object  Analog Alarms/Events  Binary and Bit Events  Alarm – Change of State, Alarm – Out of Range  Alarm – Floating Limit, Alarm – Time Delay, Alarm – Deadband  Alarm – Command Failure, Event Settings (EVS)  Active Alarm List

Other courses

  • 🎓TIA Portal:

       📌Plc programming

       📌Ladder language with digital I/O

       📌Ladder language with analog I/O

     

    🎓SCADA:

    • Industrial Application – Conveyor Control from SCADA – Designing Screen
    • Industrial Application – Making Tags
    • Time based update/deletion of data
    • Creating Reports in the SCADA Screen
    • Simple Label
    • Numeric Label
    • Multi-state Indicator
    • LED Display
    • Moving Analogue Indicator
    • Cylindrical Tank, Level Indicators & Linear Scale
    • Meter & Thermometer
    • Numeric Input
    • PLC Box Sorting (1)- Understanding the Environment & SCADA Screen
    • PLC Box Sorting (2)- Creating and Linking Tags
    • PLC Batching (1)- Understanding the Environment and Ladder Logic
    • PLC Batching (2)- Creating and Linking tags
    • PLC Batching (3)- Animating the Level Indicators
    • PLC Batching (4)- Monitoring Plant Status
    • Controlling and Monitoring an Analogue Process- VFD Control




  • 🔰Substation types

    • 🔖Knowledge about different types of substations
    • 🔖 What are the basic documents you need to know for a substation design?
    • 🔖Plan, SLD, Sectional Draw, Layout E.T.C

    🔰Switchgear types

    • 🔖AIS
    • 🔖 GIS

    🔰Types of transformers

    • 🔖Power Transformer
    • 🔖Distribution Transformer
    • 🔖Other transformer
    • 🔖Selection of transformer

    🔰Transformer parts and accessories

    • 🔖Bushing
    • 🔖Main / conservator tank
    • 🔖Radiator, OTI, WTI E.T.C
    • 🔖OLTC

    🔰Switchgear system with selection and calculation

    • 🔖 CT
    • 🔖PT
    • 🔖 ISOLATOR
    • 🔖 ACB/VCB/SF6

    🔰Substation controlling

    • 🔖 CT
    • 🔖PT
    • 🔖 ISOLATOR
    • 🔖 ACB/VCB/SF6
    • 🔖Multifunctional relay
    • 🔖Transformer Controlling
    • 🔖MK Box

    🔰Transformer self-protection

    • 🔖Buchholz Relay
    • 🔖 PRD
    • 🔖OSR

    🔰Other’s protection

    • 🔖 Differential Relay
    • 🔖 Directional/NON Directional, O/C , E/F
    • 🔖TCS Relay
    • 🔖Under/Over voltage relay
    • 🔖 Trip relay

    🔰Relay programming

    • 🔖 Knowledge about relay programming
    • 🔖Areva
    • 🔖 Micom /Schneider

    🔰Earthing

    • 🔖Substation Earthing
    • 🔖Switchgear and relay testing details
    • 🔖Knowledge about substation testing kit

    Transformer testing

    • 🔖Meggar Insulation test
    • 🔖Oil test
    • 🔖 Tan delta test
    • 🔖 Magnetic balance test
    • 🔖 Vector Group Test

    🔰PFI

    • 🔖Calculation
    • 🔖 Design
    • 🔖 Panel Making

    🔰Panel making

    • 🔖 PCC Panel
    • 🔖PFI panel
    • 🔖MCC panel

     

    🔰Substation documentation

    • 🔖Records
    • 🔖 Checking
    • 🔖 Spares
    • 🔖Billing

    🔰SCADA

    • 🔖 Metering
    • 🔖 Controlling
    • 🔖 Designing

    🔰Design and Calculation with ETAP Software

    • 🔖 Load flow analysis
    • 🔖Short circuit analysis
    • 🔖Voltage drop analysis
    • 🔖Arc flash studies
    • 🔖Types of buses
    • 🔖SLD
    • 🔖 Earthing design

     

     

  •    📌Introduction of Industrial Safety
  •    📌BNBC, NFPA, ACCORD, Alliance Rules about Safety.
  •    📌Hazard Controls
  •    📌What is Fire?
  •    📌Classification of Fire & Fire Extinguishing.
  •    📌How to use a Fire Extinguisher?
  •    📌Electrical Safety Management System
  •    📌Types of Injuries Based on The Amount of Current Flowing Through the Body
  •    📌Lock Out, Tag Out
  •    📌Safety and Health Signalization.
  • 🔰Overview of solar PV system (PART-1)

       🔸Introduction of solar PV system

       🔸Solar cell, solar panel, solar string, solar array

       🔸Different Solar module connection configuration

       🔸 Types of solar panel, Solar PV system, Inverter.

       🔸Overview of main components of the system

       🔸Types of structure

       🔸 O/P of solar PV system

       🔸What affects electricity output

       🔸 Getting the most electricity from a panel

       🔸 Thermal generation (CSP) & Photovoltaic (CPV)

    🔰 Postmortem of Solar Cells (PART-2)

       🔸 Solar radiation, GHI, GII, GEI

       🔸 Hot spot effect

       🔸 Half-cell, multi-busber cell

       🔸100% efficient solar panel & Cell

       🔸 Solar cell datasheet & Smaller cell vs bigger cells

       🔸 Fill factor

       🔸 Solar cell multi-busber & cutting and reconnecting

       🔸 Make the solar panel by cell

       🔸 Compare between Panel efficiency & cell efficiency

    🔰 Postmortem Solar Panel(PART-3)

       🔸  Different Solar panel datasheet overview

       🔸  Mono , Mono Perc & Mono Bifacial silicon solar panels

       🔸  STC ,NOCT,PTC &CEC panel power output,Voltage,Amp per m2

       🔸  High temperature & low temperature impact on solar cell, panel and system

       🔸  Calculate minimum voltage of solar panel and system

       🔸  Calculate maximum voltage of solar panel and system

       🔸  Calculate NEC maximum voltage of solar panel and system

       🔸  Temp rating of solar panel

       🔸  Temp coefficient of different types of solar panel

       🔸  Mono vs Mono ,Poly vs Poly & Mono vs Poly high temp performance

       🔸  The min and max number of panels in the string and array

       🔸  Max current and max series fuse rating maximum system sizing

       🔸  Factors that change performance of PV.

    🔰 Solar Pv Design by excel sheet(PART-4)

       🔸 Calculate Solar panel efficiency power and size

       🔸 Calculate Solar panels min. Voltage , max. Voltage & nec table calculation

       🔸 Calculate Solar panels series, parallel & mixed connections

       🔸 Calculate Solar array max. Voltage calculations

       🔸 Calculate From String & array to combiner box

       🔸 Calculate Battery introduction

       🔸 Calculate Battery temp compensation introduction

       🔸 Calculate Battery temp and charger controller numbers speaking part 1

       🔸 Calculate Batteries connections – series and parallel

       🔸 Calculate Battery bank sizing

       🔸 Calculate Inverter sizing

    🔰 Project Planning (PART-5)

       🔸Step 1: engineering site visit

       🔸 Step 2: permits and documents

       🔸 Step 3: ordering equipment

       🔸Step 4: civil work

       🔸Step 5: structure

       🔸Step 6: panel installation

       🔸Step 7: electrical work

       🔸Step 8: testing and commissioning

       🔸Step 9: project report submission

    🔰 Overview Your Location.(PART-6)

       🔸 Latitude, longitude & Coordinates’ position indicators

       🔸 Time zone & Time difference between two locations

       🔸  Latitude and seasonal changes

       🔸  Understand of sun path chart

       🔸  Magnetic & true azimuth

       🔸  Understand of Solar panel optimum orientation

       🔸  Solar irradiance & power production in Different hemisphere

       🔸  Adjustable tilt angle setting & Fixed tilt setting- solar irradiance & power production

    🔰 The Shadow – Three Different Sources (PART-9)

       🔸  Shadow length in summer solistice & winter solistice

       🔸  Shadow length on equinoxes

       🔸  Solar panel shadow at any tilt ,location & time

    🔰 Solar Pv Design By Sketchup Software(3d Animation) (PART-10)

       🔸  Number of project design by sketchup software

       🔸  Shadow analysis

       🔸  Pvwatt,pvgis report

       🔸  3D animation making with video

       🔸  Solar project by skelion

    🔰 Protective Device & Cable Sizing(PART-11)

       🔸  Solar cable and sizing

       🔸  Protection system and sizing

    🔰1-10 Mw Solar Pv Project Design By Pvsyst Software(PART-12)

       🔸  A complete walkthrough of the pvsyst software

       🔸  Define site characteristics including location and weather data

       🔸  The science, mathematics & art behind solar pv system design

       🔸  The complete understating of a client’s requirements to prepare a pvsyst design

       🔸  Performing a virtual and in-person site assessment

       🔸  Learn to calculate all input values such as azimuth, tilt, losses, etc.

       🔸  Aanalyze the output

       🔸  Gain an overview of the system losses, and how they impact the simulation of the pv system.

       🔸 Detailed knowledge of losses, 3d modeling and near shading analysis

       🔸  Analysing a pvsyst report and creating a professional sales proposal

       🔸  Being able to independently perform grid-connected pvsyst simulations of up to 10 mw

       🔸  Perform p50 – p90 estimations for a pv system.

       🔸  Perform economic and greenhouse gas abatement analysis on a pv system.

    🔰 Pvsyst With Sketchup(PART-13)

       🔸  Mega watt project on grid system pvsyst design step by step

       🔸  One complete sketchup design for solar system step by step

       🔸 Number of example of solar project design by pvsyst with Sketchup

🎓Section 1: MATLAB Introduction

🎓Section 2: SIMULINK Introduction

🎓Section 3: MATLAB BASIC CODING

  1. Coding basic
  2. Entering Command & Matrix & Array
  3. Array & Data
  4. Characters & Strings
  5. Data type & Conversion

 

🎓Section 4: MATHEMATICS

  1. Elementary Math, variables and constants, operators.
  2. Matrix and Linear Algebra review
  3. Random Number Generation
  4. Interpolation
  5. Numerical Integration & Differential Equations
  6. FOURIER ANALYSIS
  7. PLOTTING

 

🎓Section 5: SIMULATION

  1. Familiarization with Power System Block
  2. DC /AC CKT design (KVL, KCL, RMS, Regulation, Harmonic etc.)
  3. Design a Micro grid from basic

🎓Section 6: Power System Engineering

🎓Section 7:

Machine learning basic with MATLAB

IoT basic & IDE device interfacing with MATLAB

🔰Part 1:

  1. About AutoCAD Electrical Software
  2. Software Installation

🔰Part 2

  1. Welcome Screen
  2. AutoCAD user interface
  3. Navigation Bar
  4. WCS\UCS
  5. View Cube
  6. Co-ordinate System
  7. Units Setup
  8. Limit
  9. Grid
  10. Grid Display
  11. Snap
  12. Dynamic Input
  13. Ortho Mode
  14. Save File
  15. Application Menu Button
  16. Unit

🔰Part 3

  1. Polyline
  2. Circle
  3. Arc
  1. Copy
  2. Erase
  3. Polar Tracing
  4. Object Snap

🔰Part 4

  1. Select Object
  2. Rotate
  3. Scale
  4. Offset
  5. Mirror
  6. Trim
  7. Extend
  8. Chamfer
  9. Fillet
  10. Rectangular Array
  11. Polar Array
  12. Path Array

🔰Part 5

  1. Dimension
  2. Text
  3. Line weight
  4. Line Type
  5. Match Properties
  6. Table
  7. Layer
  8. Block

🔰Part 6

  1. Donut
  2. Region
  3. Wipeout
  4. Helix
  5. Spline
  6. Xline
  7. Ray
  8. Point
  9. Multiple Point
  10. Divide
  11. Measure
  12. Break
  13. Break at Point
  14. Join
  15. Stretch
  16. Boundary

🔰Part 7(BNBC,NEPA,IEC,NEC Rule regulations)

📌Project-1

1.how to draw a floor plan

2.how to daw side elevation of a building

📌Project-2

1.Motor controlling theory

2.how to draw motor controlling diagram in Autocad electrical

3.Load calculation of motor controlling circuit

📌Project-3

1.How to draw electrical layout diagram

2.total load calculation of a building

📌Project-4

1.single line diagram of a substation with load calculation

2.single line diagram of building with load calculation

📌Project-5

1.How to draw LPS system in Autocad electrical

2.total load calculation of a LPS system

📌Project-6

1.How to draw a sub-station room in SketchUp software

📌Project-7(BNBC,NEPA,IEC,NEC Rule regulations)

1.Prince Mohammad Bin Abdul Aziz International Airport, Automation

2.Hearth Center in King Fahad Hospital, Building Management System

3.Taibah University Madinah,Female phase 2 male phase 1 2, male B16 A, Lab and research center B19,

4.Science College male B 11, PLC Automation.

5.Wadi Ridan Industry, PLC, VFD, Automation

6.Bosphour 1, 5 Star Hotel, Automation System

7.Bosphour 2, 5 Star Hotel. Automation System

8.Asafia Hotel 5 Star Hotel,Automation System

9.Holiday villa 5 Star Hotel,Automation System

10.Nokba 5 Star Hotel,Automation System

11.Alamana Palace 5 Star Hotel,Automation System

12.Islamic University gymnasium building,Automation System

13.Royal Commision of Saudi Arabia, 500kva generator

14.Qala Haziziya School,Automation System

15.Al Faihaa,Automation System

16.Al Rabaa Tower,Automation System

17.Dean Maramara,Automation System

18.Chamber of Commerce ,Automation System

19.Khurasaniya,Automation System

20.Manar Al Madina,Automation System

21.Alrajhi Bank,Automation System

22.Social College in Madina,Automation System

23.Al Rafeaa,Automation System

24.Medecine College Jedda,Automation System

25.King Abdul Aziz University,Automation System

26.RUH School,Automation System

27.250 KW On grid system, Madina Qala Haziziya School

28.170 KW irrigation system, Sudan

29.720 KW Solar System, Sudan

30.2.1 MW Saudi Arabia

31.50 KW Madia

32.Street light in Madina

33.6HI Mill

34.Colour Coating Line

35.Trimming and Picking line

36.132/33kv(GIS+AIS) substation

37.CTL

38.Unilever Scada project and many more.

39. Lab Development & Modification, Daffodil Institute of IT

40. Mustafa Hakim Group, Cement Mill – Existing System Modification with Automation.